Electrical Wiring At Home
Our country is on the path of development, in
such a situation, many people are building houses, shops, factories, high
buildings, in such a way, we ask the electrician what wires should be installed
in the house and what kind of connections we will give you today.
A few
important things are being made that you should keep in mind while wiring the
house, because if you get the wiring done properly at home, then avoid the
troubles that come later, and that is also our objective. So that the wiring of
your house becomes good and there is no problem later
Who should put stars in the house and make the type of wire?
 |
| Electrical Wiring |
While wiring the viewers home, first of all, you should see how much
electricity is consumed and how much kilo load is there in the house.
On the estimate, the electricity load of your house is 2 kilo watts.
So from 2.5mm to you. Get wires up
to 1mm, in this way also tell us how to select tarun.
1 To use 2.5 mm for the man board of
the house,
take the man board near the man gate
of the house.Put 1.5 mm wires from the 2 man board to every board in the house,
which is the circuit board
Put 1 mm wires in connection with 3
circuit board like bulp, fan, lamp are installed
In the wiring of the 4 inverter we use only 1 mm,
Keep in mind that the color of each wire should be different, and use the
same wire from the best company such as super wire, Kalinga wire, polycab,
Havells, Finolex, Rar cable,
kei wire Use only
If your power load is more than 2 KW, then contact us or comment, we will tell you in the next post (TE ELECTRICIAN)
 |
| Electrical Wiring At Home |
1 Comments
Good line
ReplyDelete